Sebo ET-C Bedienungshandbuch PDF herunterladen (Seite 10)

CLOG REMOVAL

NOTE! C3.1 users with ET-C, ET-H, ET-1 or ET-2 power heads, please refer

to your power head user’s manual for more detailed instructions for remov-

ing clogs in your power head.

If the “bag full or clog” warning light (10) remains illuminated after the fil-

ter bag has been changed and the filters are in good condition, there is like-

ly a clog in the system.

Clogs in the Head or Brush - Figure 15

Clogs in the swivel neck (49) of a head or brush can be cleared by first press-

ing the tool release button (9) and removing the brush or head. Check inside

the swivel neck channel (49), and clean out pathway.

Clogs in the Telescopic Tube - Figure 15

Remove head from telescopic tube (4) by pushing the tool release button and

pulling the tube out. Remove the hose from the top of the telescopic tube by

pushing the handle release button (3). A stiff wire or stick can be used to push

the clog out of the tube.

Clogs in the Hose - Figure 16

To clear blockages in the hose (10), remove the telescopic tube (4) by pushing

the tool release button and pulling the tube out. Hold the hose upright with

one hand blocking the top and switch on the machine. If necessary, quickly lift

your hand on and off the end of the hose. If that does not clear the clog, you

may also clear clogs by reversing the hose. After removing the telescopic

tube, push the release button on the hose neck (6) and remove the hose from

the machine. Insert the opposite end of the hose (10) into the suction neck (7).

Hold the hose upright with one hand blocking the top and switch on the

machine. If necessary, quickly lift your hand on and off the end of the hose.

Note: Do not insert a wire or stick into the hose. Doing so may cause dam-

age to the hose.

Clogs in Entrance to Filter Bag - Figure 17

Remove hose (10) from vacuum cleaner (see figure 16) and remove filter bag

cover (figure 13, page 9). Clean out entrance to bag (50).

Figure 16

Always unplug vacuum from outlet before removing

any clogs!

Figure 17

Figure 15

1 2 ... 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Sebo ET-C Bedienungshandbuch Seite 10